INSTRUCTIONS FOR USE
| AUTO |
HOME |
BUSINESS |
| Whitewalls |
Set Stains |
Stainless Steel |
| Leather |
Walls |
Walls |
| Cloth |
Woodworks |
Machinery |
| Velour |
Floors |
Typewriters |
| Vinyl |
Carpets |
Adding Machines |
| Chrome |
Upholstery |
Presses |
| Motors |
Ovens |
Floors |
| Headliners |
Leather |
Equipment |
| Door Panels |
Chrome |
Cement |
| Convertible Tops |
Porcelain |
Furniture |
| Rust |
Fiber Glass |
Glass |
| Road Tar |
Tile |
Degreasing |
| Oxidation |
Linoleum |
Door Frames |
| Carpeting |
Removes Mildew1 |
Paint on Hands |
| De-Fog Glass |
Clothes stains |
Most Glues |
| Door Jambs |
|
Overspray |
Mx8 can be used in many ways. In solution, It can be applied with a spray bottle. While in other applications it can be used for dipping or steam cleaning.
DIPPING
Mx8 may be used for dipping to remove carbon deposits from piston heads, epoxy glues, surface rust and heavy degreasing. Some examples are engines, spare parts, metals (finished or unfinished) and many other tough problems.
1. When dipping use 7:1 solution and soak for approximately two hours.
2. If necessary, rinse with water to remove light oil film
3. Solution may be filtered and reused when soiled.
STEAM CLEANING
Mx8 can be used in steam cleaners to do such jobs and paint work, floors, engines and all types of heavy machinery.
1. Add Mx8 to tank in a 50:1 solution, for pressure 10 p.s.i. and lower
2. For additional pressure:
200 p.s.i. increase solution to 60:1
300 p.s.i. Increase solution to70:1
400 p.s.i. Increase solution to 80:1, upto 140:1
TO DEGREASE CAR ENGINES
1. Dilute Mx8 to 7:1 with water
2. Spray on engine or engine parts
3. Rinse with pressure hose or garden hose.
BODY SHOPS
Mx8 will remove urethane off glass, hand upholstery and carpets without smearing. Interact recommends a pre-spray consentrate at the beginning of this particular task. Below we have listed other applications.
1. Removals of over pray from brake lights, tires, glass, and interior.
2. Removal of silicon from doorjambs tires interior.
3. Metal prep primer wash, anti-static, prevents fisheyes, swirls and bubbles.
4. Paint oxidation: work in section 10:1 solution, will restore paint in half the time.
PRINTING
Mx8 may be used to replace wash or other chemicals used to clean printing equipment. Mx8 has a petroleum butyl base that us extremely good for rubber articles. Mx8 also contains alcohol, and in drying and minor expansions of the roller.
1. It can be applied in a spray form or applied directly with a cloth at a 10:1 solution.
2. Mx8 can be used on the painted machine to remove inks. With no adverse effect to the paint. It is also ideal for removing ink from the hands and clothes.
MACHINE SHOPS
Mx8 will replace versal, carb-cleaner, WD-40 and handle your dipping tanks at 7:1 or 10:1
CONCRETE
Mx8 will replace mujratic acid for cement dust on painted surfaces.
ALUMINUM, STAINLESS STEEL, MAGNESIUM, CHROME
Mx8 will attack these problems with a 20:1 solution, Mx8 REMOVES salt pits, rust, and water stains on ovens and can also inhibit rust from occurring when used regularly. Mx8 does not leave streaks on aluminum.
CARBON
Used at 20:1 solution, Mx8 can solve these problems.
1. For stacks, spray directly on and rinse off surface when carbon appears to run.
2. When using for dipping (in extreme cases) mix a 7:1 solution, soak for one hour and rinse (example: carbon on piston heads, epoxy glues, silicon, seals and gaskets).
CARPETS
WITH CARPET MACHINE
1. Vacuum before shampooing
2. Use 50:1 mixture with water (10:1 if very solid)
3. Add solution to holding tank in machine
4. Shampoo entire carpet
5. Remove excess moisture from carpet with towels or vacuum if necessary
WITHOUT CARPET MACHINE:
1. Vacuum carpet
2. Dilute MX8 30:1
3. Apply with soft bristled brush or sponge mop to loosen soil
4. May be wiped with clean towel if necessary on badly solid areas
5. Vacuum
AVIATION
Mx8 has been successfully used on all types of aircraft. Removal of carbon, paint oxidation and canvas on spray planes helicopters; dispersal of water on windows prevents beading.
TO CLEAN VINYL TOPS AND REMOVE MILDEW
(see GENERAL CLEANING)
LAUNDRY
(see GENERAL CLEANING)
TO CLEAN LINOLEUM FLOORS
1. dilute Mx8 30:1 In a bucket of hot water
2. Mop floor, let sit for 3-5 minutes (Excellent with a floor buffer)
3. Mop up-no rinsing
4. For heavy wax build-up, dilute 10:1, let it set for five minutes.
TO CLEAN OVENS
1. Dilute Mx8 30:1, for badly soiled ovens, 10: 1
2. Pre-heat oven to warm temperature. Apply Mx8 to oven for a few seconds and wipe.
GENERAL CLEANING
Mx8 may be used as a general all-purpose cleaner, use Mx8 with 30 parts water, Spray surfaces such as counter tops, furniture, paneling, walls, upholstery, appliances, light fixtures, etc. wipe with dry clean cloth or towel.
As you can see, Mx8 can be used on any surface. However, a few rules should be followed.
1. Always mix Mx8 with water. Seawater may also be used. The product should not be stronger than a 7:1 solution.
2. Always test for color-fastness when using Mx8 on fabrics. Keeping this in mind, you will find Mx8 economical, quick and easy to use, and maybe even fun!
3. Write to us if you want to know more information on its use when undertaking special projects.
Note: These 30:1 strengths are for the first application. With routine maintenance, dilute Mx8 even further! |
